JRGMPARTS_Tampa_Florida_GM_Performance_Parts_GM_Crate_Engines_GM_Restoration_Parts5

Big Block 427 Anniversary
What’s HOT

GM PARTS CATALOG


FREE SHIPPING ON MOST CRATE ENGINES

GM Chevy Small block V8
GM PUSHRODS

GM Performance Parts offers a complete line of heavy-duty pushrods for most GM engines. They are designed to deliver outstanding performance in high-performance street and competition applications and are available in two materials: 1010 mild steel, which is suitable for high-performance street cars, power boats, street rods, and limited competition applications, and 4130 chromemoly steel, for maximum-performance racing engines.

Note:
TECH Note: Heavy-duty pushrods for small-block V-8 and V-6/90 engines are available in standard and 0.100" extended lengths. Longer pushrods can be used to restore the correct valvetrain geometry when using a high-lift camshaft with a small base circle. Extra-long pushrods also are recommended when longer-than-stock valves are installed. GM Performance Parts pushrods are case-hardened for use with pushrod guide plates.

GM SMALL- BLOCK PUSHRODS
Part Number Material Diameter Length Usage Description
12495491 1010 steel 5/16" 7.724" Flat tappet (16) Heavy-duty heat-treated .075" wall, hardened tip inserts. Standard length. Use 14044874 for single piece.
14044874 1010 steel 5/16" 7.724" Flat tappet (1) Heavy-duty heat-treated .075" wall, hardened tip inserts. Standard length.
12371057 1010 steel 5/16" 7.824" Flat tappet (16) Heavy-duty heat-treated .075" wall, hardened tip inserts. +.100 long. Use 366277 for single piece.
366277 1010 steel 5/16" 7.824" Flat tappet (1) Heavy-duty heat-treated .075" wall, hardened tip inserts. +.100 long.
10046173 1010 steel 5/16" 7.122" Hyd. roller (1) Heavy-duty heat-treated .060" wall, standard length. For use in early ZZ-series engines with guide plates
12371041 1010 steel 5/16" 7.122" Hyd. roller (16) Heavy-duty .060" wall, standard length. For use in 2nd design ZZ-series engines without guide plates.
Use P/N 10241740 for swingle piece.
10241740 1010 steel 5/16" 7.122" Hyd. roller (1) Heavy-duty .060" wall, standard length. For use in 2nd design ZZ-series engines without guide plates.
10134309 4130 steel 5/16" 7.896" Special (1) Chromemoly 1-piece design racing pushrod

GM SMALL- BLOCK GUIDEPLATES
Part Number Description Technical Notes
3973418 Pushrod guide plate (cast iron head) For use with production and Bowtie cast iron cylinder heads with screw-in studs. Can also be used with aluminum Bowtie V-6 head. Should not be used with self-aligning rockers. Pushrod slots are 0.325". For 90 V-6, use on cylinders 1, 2, 5 and 6; guide plate must be ground to clear valve cover hold-down bolts. Four required per V-8 head.
14011051 Pushrod guide plate (aluminum Bowtie head) Hardened steel guide plate has the correct pushrod spacing for aluminum Bowtie heads. Should not be used with self-aligning rockers. Pushrod slots are 0.365". Four required per V-8 head.
10111771 Pushrod guide plate (Corvette aluminum head) Non-hardened guide plate for use with Corvette aluminum cylinder head assembly P/N 12556463 and 350 HO engineassembly P/N 10185072. Four required per V-8 head.

GM ROCKER ARM STUDS

12495497
Screw-In Rocker Stud Kit (3/8") (not shown)
• 3/8" studs fit all high-performance small-block V-8 and 90 V-6 Chevrolet cylinder heads machined for screw-in studs and using guide plates
• Won’t pull out of their bosses under high load
• Kit includes 16 pieces, for single stud usage, use P/N 10168410
• Lower thread section is 7/16-14

Note:
Screw-in studs can be installed on heads originally equipped with pressed studs by machining and tapping the stud bosses.

E. 12371058
Screw-In Rocker Stud Kit (LT1, LT4 Style)
• 3/8" studs are used on all late -model LT1, LT4, and any head not using a pushrod guide plate
• Kit includes 16 pieces; for single stud usage, use P/N 12552126
• Lower thread section is 7/16-14

3921912
Screw-In Rocker Stud (7/16", Big-Block Style) (not shown)
• Beefy 7/16" big-block V-8 rocker studs
• Improve valvetrain stability of any small-block V-8 or 90 V-6 racing engine by minimizing rocker stud flex
• Fits any small-block V-8 or 90 V-6 cylinder head machined for screw-in studs
• Requires rocker arm for 7/16" stud

Heavy_Duty_Pushrod_Kit Screw_In_Rocker_Stud_Kit

 

 

 

|Home James Rivard GM Parts| |GM Performance Parts| |GM Parts| |GM Accessories| |Restoration Classic GM Parts| |About Us|

James Rivard GM Certified Used Cars Tampa Florida

James Rivard Buick Pontiac GMC Certified Used Cars Tampa Florida
James Rivard GM Certified Used Cars Tampa Florida Hillsborough

9740 Adamo Drive (SR60) - Tampa, FL 33619
***Prices may change without notice.***
***Not liable for wrong prices or misinformation.***
Free Shipping on Most Engines to 48 states
Please contact our Webmaster with questions or comments.
© Copyright 2009 James-Rivard, Inc. All rights reserved
 

GM performance parts Tampa