V-6 90 CAMSHAFTS
Part Description Duration Maximum Lobe Technical Notes Number @ .050" Lift (in) Centerline Lift (deg) (deg)
10051147 Hydraulic roller I: 222 I: .447 114 Excellent power and torque for engines without balance shaft. tappet E: 222 E: .447 Use only with
roller tappet block.
10134321 Hydraulic flat I: 224 I: .450 112 High performance street and marine cam for 4.3L V-6. Use only with tappet E: 224 E: .460 roller tappet block. V-6 60 CAMSHAFTS
Part Description Duration Maximum Lobe Technical Notes Number @ .050" Lift (in) Centerline Lift (deg) (deg)
12363220 Hydraulic flat I: 204 I: .427 107 Performance cam for 3.4L conversion (P/N 12363230) and 3.1L and 2.8L tappet E: 216 E: .454 engines.
Increases mid-range torque and power. Uses valve spring P/N 12363215 and retainer P/N 12363216.
12364059 Hydraulic flat I: 204 I: .427 112 Performance cam for all 1980-1994 2.8L and 3.1L engines. Increases tappet kit E: 216 E: .454 mid-range torque and power. Use with 8.0-9.5 C.R. Not legal for pollution-controlled vehicles. Kit includes tappets. V-6 90 CAMSHAFTS 12453171
Camshaft Bearing (not shown)
• Small-block V-8 bearing provides wider bearing surface than standard V-6 bearings
• Install in front and rear bearing housings with oil hole between 4- and 5-o’clock position, as viewed from front of block | 
