19170026 NEW
Maxshine Intake Manifold Manifold has bright silver chrome finish with powder coated durability, and resists discoloration from heat.

12342089 Small-Block Chrome Timing Cover Attractive chrome cover for 1969–1991 small-block V-8 and all 90 V-6 engines. Direct replacement for covers that use bolt-on timing pointer. Supplied with oil seal.

10185063 Intake Manifold Make power with our low-profile, aluminum, four-barrel intake manifold.

19170092 NEW Carburetor, Holley 670 Holley 4160-style four-barrel has show car quality polished finish, center-hung fuel bowls, vacuum secondaries, and power value blowout protection.

12361146 High-Torque Mini-Starter Crank up with this powerful, compact, gear-reduction starter for either 153- or 168-tooth flywheels.

88965829 Carb Spacer Fully CNC’d from billet aluminum, this spacer has the GM Performance Parts logo machined into its front and back, and accepts Quadrajet style carburetors.

93440806 HEI Distributor A must for steel roller cams. Has ignition advance curve for high-performance applications.

12480127 Short Aluminum Valve Covers Cast aluminum Chevy Bowtie-design valve cover with a PCV hole in both covers (grommets included). Covers have oil baffle.

88961867 Distributor, Billet HEI Billet aluminum CNC-machined housing provides great strength. Ball bearing guide, oversized shaft and long sintered bushing for stability. Offers mechanical advance and vacuum advance. Includes brass terminal cap.

12341670 Chrome Short Valve Covers Short chrome valve covers, with baffle, for use on pre-1986 engines with perimeter hold downs. Chevrolet and the Bowtie logo are embossed on top.

12361056 Spark Plug Wires 8mm red double-wall silicone plug wires with 135 spark plug boots.

12497979 Aluminum Black Crinkle Valve Covers, Center Bolt Design Approximately 1/4" taller than production covers. Kit includes bolts, washers and seals. NOTE: Use valve cover gasket P/N 10046089.

12496806 Wire Loom Kit, Small-Block Stainless steel supports with the Bowtie insignia laser- cut in each of the six supports. Twelve retainers, bolts, and washers are supplied to bolt to the side of the head. Use with Spark Plug Wire Set P/N 12361051 and P/N 12361057.

24502540 Valve Cover Adapter Allows the use of flange mount (perimeter hold-down) valve covers on 1986-and-newer center hold down-style heads. Adapters are CNC machined from billet aluminum stock. Kit includes two 3/8" thick adapters, O-rings and fasteners.

3952301 Oil Filter Adapter Mounts a spin-on cartridge for smallblock V-8s (except LS Series). Contains a filter bypass valve and requires two attaching bolts, P/N 3951644.

12341993 Push-In Oil Filler Cap Round oil filler cap with Bowtie logo for valve covers with 1.22" diameter hole.

14011012 Aluminum Water Pump, short-style Saves weight over comparable iron pump. Casting has short-style mounting legs used on pre-1982 Corvettes. Pump has reinforced snout and a large hub with dual bolt patterns.

12342071 Air Cleaner, Chevrolet-logo Classic Design Fourteen-inch round classic-style air cleaner has chromed lid with embossed Chevrolet name and Bowtie attaching nut. Fits most four-barrel and two-barrel carburetors.

12342080 Air Cleaner, Chevrolet-logo High-Performance Design Fourteen-inch round high-performance style air cleaner has chrome lid with embossed Chevrolet name. Fits most four-barrel and two-barrel carburetors.

12355612 Fuel Pump, Street Performance (Chevy Small-Block) For use on carbureted engines Pump has 7 psi shutoff pressure and a free-flow rating of 110 gph

12368084 Engine Oil Primer Use to lube engine bearings prior to starting your new crate engine.

Harmonic Dampener 12551537
Polished Aluminum Die-Cast Valve Covers 12363970
Aluminum Water Pump, long-style 12495826

Roller Rocker Arm Set, 1.5:1 ratio 12370838
Standard starter (straight bolt holes) 10496873
Standard starter (offset bolt holes) 10496871

Motor mount—truck (2 req.) 15731260
Motor mount—car (2 req.) 22188497
Bolt (motor mount—2 req.) 460308
Transmission mount (700R4) 22188145

Transmission mount (TH400) 17990778
Transmission mount (4L60 & 4L80) 157678

Fan Clutch (serpentine belt) 15671898
Fan Clutch ( V-belt) 88961767

Fan 19.5" (serpentine belt) 15563127
Fan 19.5" (V-belt) 15644302

Fan Studs—4 req. (serpentine belt) 12338107

Fan Studs—4 req. (V-belt) 382919
Fan Stud Nuts (4 req.) 12338130

Fan bolts (4 req.) 94402